• Welcome to the new COTI server. We've moved the Citizens to a new server. Please let us know in the COTI Website issue forum if you find any problems.
  • We, the systems administration staff, apologize for this unexpected outage of the boards. We have resolved the root cause of the problem and there should be no further disruptions.

A bit o' High Guard hidden within Book 2

robject

SOC-14 10K
Admin Award
Marquis
Whilst reverse engineering the small craft in Book 2 into Traveller 5 designs, I noticed that their fuel requirements are in line with High Guard.

This makes Book 2's ship design system an even more bizarre anomaly. Is this intentional, or not?

The rule appears to be: fuel (tons) = 0.01 x hull tonnage x maneuver rating (implicit is the assumption that the power plant has the same rating as the maneuver drive). The minimum fuel volume is 1 ton, and is usually rounded up. I don't think there's a duration given, but I assume 1 month for the calculated fuel requirement.

This small bit of data feeds into my Proto-Traveller Book 2 Plus ship design system.

The Pinnace requires 2 tons of fuel. 0.01 x 40t x 5G = 2 tons.
The Slow Pinnace requires 1 ton of fuel. 0.01 x 40t x 2G = 0.8 tons (but minimum is 1 ton, so duration is longer).

The Ship's Boat requires 2 tons of fuel. 0.01 x 30t x 6G = 1.8 tons (round up to 2 tons).
The Slow Boat requires 1 ton. 0.01 x 30t x 3G = 0.9t (minimum is 1 ton, so duration is slightly longer).

And so on.

The only design which does not round up (but probably should have) is the Shuttle.

The Shuttle requires 0.01 x 95t x 3G = 2.85t. ("should" round up to 3, but does not).
 
Last edited:
Back
Top